Xtremely Easy to Install
Built to Lasts - 10+ years
Xtreme Easy is a pre-mixed, 1-component resin paving joint
compound suitable for concrete pavers, natural stone, and tile.
So why a Resin and not Poly Sand (Polymeric sand)?
- Lasting up to 2x longer than poly sand - 10+ years
- Install even if pavers are wet - no need to waste time drying pavers with torches
- Safe & Easy Install - no poly haze, just add water and sweep in - it's that simple
- Permeable joint
- Pressure washer friendly
Specs:
- Comes in a 33lb Bucket & vacuum sealed bag
- Water Permeable joint (approx. 0.075 gal/min/sq. ft. for a joint fraction of 5%)
- Air-dry to cure - remain off surface and protect from heavy rainfall for 24 hr.
- Self-compacting (we recommend compacting just to ensure a longer lasting joint)
- 1/8'' minimum joint width suitable for ceramic tile, 1/4" for concrete pavers, and up to 1" joint width for natural stone
- For pedestrian traffic loads (not suitable for vehicular traffic)
- Application Temperature Range - 37-80°F
- Compressive strength - 16.0 N/mm2 / 2320 psi
- Flexural Strength - 8.0 N/mm2 / 1160 psi
Excess/Leftover Material? Save it for future use! Put it back in the bucket and fully submerge it in water at least 1in above material.
Joint Material Calculator - Click Here!
Clean and Protect your project after jointing - Click Here!
Pairs well with: The Hydro Broom
Instructions: Click Here
Provided by PHNA | Click here for Data Sheet
